Serving Wichita & Sedgwick CountyCall (316) 710-8260

Single, double and custom vanities

Bathroom Vanity Tops in Wichita, KS

A small job with precise details: sink placement, faucet spread, side splashes and a tight fit to the wall.

  • Free in-home estimates
  • Written, itemized quote before any slab is cut
  • Laser or template measuring after cabinets are set

Vanity Tops Cut for Your Sink, Faucet and Wall

Bathroom vanity tops are small pieces of stone with very little room for error. The sink has to center on the cabinet and clear the drawers, the faucet holes have to match the faucet's spread, and the top has to sit tight against walls that are often out of square in older Wichita homes. Getting those details right is most of the work, and it is why we template vanities rather than ordering a stock top.

Materials that work in bathrooms

Quartz is a popular choice for vanities: it is non-porous, easy to clean, and holds up to toothpaste, makeup and hair products. Granite works well and often uses a remnant piece, which can lower cost on a small top. Marble looks classic but etches from acidic products and needs sealing. Solid surface can include an integrated sink with no seam, and cultured marble is common on budget and stock vanities. HomeAdvisor lists vanity materials at roughly $50 to $200 per square foot for quartz, $40 to $100 for granite slab, and $40 to $180 for cultured marble.

Sizes and configurations

Single vanities are commonly about two to three feet wide, and double vanities often run five to six feet or more. Some bathrooms have a vanity that runs wall to wall, which means the top needs to be scribed to both side walls. Others have one exposed end that needs a finished edge. We also cut matching side splashes and back splashes, and can extend the top over a toilet tank or into a makeup area.

Sink choices

Undermount sinks are the usual pairing with stone because there is no rim to trap grime. Vessel sinks sit on top and need only a drain hole and the right faucet height. Drop-in sinks work with any top but leave a rim. We need your sink and faucet, or their exact model numbers, before cutting, because cutout sizes vary.

Plumbing

We reconnect the drain and supply lines to the existing rough-in. If you are moving from a single sink to a double, or shifting the sink off center, the drain and supply lines need to move, and that is plumbing work that falls under MABCD permits in Wichita and unincorporated Sedgwick County. We flag it at the estimate so it can be handled by a licensed plumber before the top goes on.

Mid-century bathrooms

Many Wichita homes from the 1950s and 1960s still have their original small bathrooms with narrow vanities or wall-hung sinks. Switching to a vanity cabinet with a stone top can add storage, but check the depth: a standard 21- or 22-inch vanity can crowd a small room, and we can cut a shallower top for a narrower cabinet.

What This Covers

Vanity work from a single powder room to a long double vanity.

Single and double vanity tops

Tops cut to your cabinet with one or two sink cutouts.

Faucet drilling

Single-hole, 4-inch or 8-inch widespread holes to match your faucet.

Back and side splashes

Matching splashes cut from the same material.

Remnant tops

Smaller tops cut from leftover stone pieces where a suitable remnant is available.

Kitchen Countertop Replacement in Wichita, KS

Typical Vanity Top Costs

ItemPublished national range
Quartz vanity material$50 to $200 per sq ft
Granite slab vanity material$40 to $100 per sq ft
Cultured marble$40 to $180 per sq ft
Solid surface, bathroom projects (Angi)$420 to $1,560
Laminate vanity material$10 to $40 per sq ft
Plumbing, if lines change$400 to $2,000

National ranges from HomeAdvisor and Angi (2026). Material-only figures exclude fabrication and installation. Size, sink and edge choices change the total. Your written estimate is the price.

How It Works

1. Measure

We measure the cabinet and walls and note the sink and faucet you plan to use.

2. Choose material

You pick the material, edge and splash style.

3. Cut

The top is fabricated with sink cutouts and faucet holes.

4. Install

We set the top, mount the sink, seal the splash joints and reconnect the drain and faucet.

Bathroom Vanity Tops in Wichita, KS

Bathroom Vanity Tops Questions

What is the best material for a bathroom vanity top?

Quartz is the most practical for most bathrooms because it is non-porous and needs no sealing. Granite is also durable; marble looks great but etches and needs more care.

Can you use a granite remnant for my vanity?

Often, if a remnant of the right size and color is available. Remnants can cost less because they are leftover pieces.

Do I need my sink and faucet before you cut?

Yes, or the exact model numbers. Sink cutouts and faucet holes are sized to the specific parts.

Can I go from one sink to two?

Yes, but the plumbing has to change, which is permitted plumbing work in Wichita. We plan that before the top is made.

Get a Bathroom Vanity Tops Estimate

Free estimates for bathroom vanity tops.

Call Now: (316) 710-8260